SKU: N/AThis site contains affiliate links for which we may be compensated
Consumer Electronics / Vehicle Electronics & GPS / Car Alarms & Security / Car Keys & Transponders
DIRECTED ® DEI 556U BULK PACKAGED Product highlights:
universal bypass for Python alarm systems
compatible with any factory RF immobilizer or transponder system, including GM Passkey3
temporarily overrides the factory immobilizer
maintains integrity of factory anti-theft system
kit can be tuned for use with European or domestic vehicles
supplied harnesses splice into factory wiring
requires permanent key mount (into compact module)
This works with any car alarm systems. You need to leave a vehicle key for this module. INSTALLATION: The 556UW requires an active key from your vehicle to be installed inside the immobilizer interface module. The 556UW is then mounted underneath your vehicle's steering column. The 556UW immobilizer interface module features the following connections. 6-Pin Harness: Power/Ground/Input Harness
Red (+)12 Volt Input: connect this wire to a fused source of constant 12 volt
Blue (-) Status Input: connect this wire to the remote start negative (-) status output
Pink (+) Ignition Input: connect this wire to the vehicle's true ignition output
Black (-) Chassis Ground: connect this wire to the vehicle's chassis ground
Violet (+) Key-Sense Input: connect this wire to the vehicle's positive key-sense output wire
Green (-) Key-Sense Input: connect this wire to the vehicle's negative key-sense output wire
3-Pin Harness: Antenna harness
Black and Black/Red Wires: both of these are antenna ring wires
Black and White Wire: closed input wire
This module is new, contains installation manual, wiring harness and module. We do not provide tech support.
Returns Accepted for this item if it's within 30 Days